Up to L90 > 100,000 Hrs | 150lm/W

Standard Suspension Mount

The standard SB4 and SB5 are suspension mount high bays with open gear trays and free access to all of the electronic components. Drivers are SELV with a minimum IP65 rating and IP67 rating to all electrical connections on both low and high power circuits.

Dust covers can be added and mount directly to the frame with angles that meet MPI “dust-shed” ratings. Holes at either end provide mounting points for optional IR-TEC ZigBee sensors.

Up to 33,000lm / L90 100,000Hrs

-40ºC to 50ºC Min/Max (Ta)

Surface Mount

The CMS, provides a surface mount solution, ideal for loading bays factories and warehouses where wash downs are not required. It can be directly mounted to roof beam or purlins. the low profiled design reduces the risk of accidental damage by fork lifts. The LED driver sits on top of the main tray and is accessible via removable side flashings.

Anti-Roosting

Birds roosting are more than a nuisance. Birds introduce parasites, disease via their droppings and present significant issues in loading bays or storage areas. The CMS side flashings to prevent roosting.

Up to 33,000lm / L90 100,000Hrs

-40ºC to 30ºC Min/Max (Ta)

Freezer Mount with External Driver

The ShortBay CMR is designed to provide a low profile through ceiling, surface mount solution suitable for insulated panel ceilings common to temperature controlled areas such as blast freezers.

Single point mounts at either end, minimise penetration of the insulated panel and when combined with insulated bolts eliminate thermal transfer through the substrate. The remote driver further minimises thermal load, provides access to the driver for long term maintenance and the ability to combine with emergency packs without damaging batteries.

Up to 33,000lm / L90 100,000Hrs

-40ºC to 30ºC Min/Max (Ta)

Surface Mount with Zigbee Sensor

The CMZ extends the functionality of the CMS mount to provide a mount for the optional IP66 ZB sensor from IR-TEC to deliver wireless connected lighting controls, that provide occupancy, and vacancy controls with full daylight harvesting.

Up to 33,000lm / L90 100,000Hrs

-40ºC to 30ºC Min/Max (Ta)

A light source should not look unnecessarily bright, its function is to light the area around it without causing discomfort. Concentrated, high power light sources viewed against dark backgrounds pose a genuine health risk.

Reducing material and component count delivers a low price, but at a cost.

ShortBay is a large surface emitter, combined with adaptive optics to provide safe uniform light, without glare. Its larger format increases production costs but prevents temporary loss of vision and reduces the risk of associated workplace accidents whilst improving productivity.

The ShortBay format adapts to suit the requirements and complexity of the application, from blast freezers to high temperature production areas, with formats and optics designed for blast freezers, food storage and preparation, large format warehousing and manufacturing, smelters and aircraft hangers.

Optional chemical protection to PCB and LED arrays and potted IP67 drivers protect sensitive components from exposure to harsh or challenging environments.

184lm/W @ Ra85

100,000Hrs/L90

Ra85 | Ra95 | 3000K |  4000K | 5000K | 6000K

The Isollux HE LED Chip is powerful and long-lasting. Capable of delivering 184 lumens per watt (before loses) and the ability to last four times the industry standard with proper driver management*. The HE Chip delivers an exceptional ROI, with a low environmental impact and class leading performance.

Isollux HE is a dual die chipset, operated at less than 50% of its peak drive current, designed to deliver the maximum service life and efficacy of the luminaire. It has an exceptionally long service life of L90 100,000Hrs specified to optimise the luminaire performance. It is ideal to support long term maintenance strategies minimising waste (See maintenance section below).

Isollux offers two standard sets of colour rendering as standard.  Our Ra85 Chipset surpasses the essential threshold for quality control and grading of fresh produce.

Whist the optional Ra 95 R9≥90* delivers perfect commercial grade colour rendering at no extra cost and without compromising on efficacy or maintained lux levels*.

1.

With up to 384 individual LEDs per bar operating at just 46% maximum drive current, ShortBay guarantees superb efficiency and maximum service life.

2.

Each bar consists of a single PCB, bonded directly to an aluminium heatsink. Optimising transfer of thermal load, with a maintained Tj just 25ºC above ambient.

3.

A laser cut and machine folded rigid steel frame provides a the structural base for the full product range, and is the gear tray onto which the power assembly is mounted.

4.

Allowing space between the heatsink and driver plate, eliminates thermal transfer between driver and LED with free air convection to cool components.

5.

LEDs are sensitive to chemicals such as bromides at just 1.5 PPM. To protect the LED assembly is sealed with a chemical and moisture coating prior to assembly.

6.

A drain hole penetrates the base at each end of the heatsink prevents build up of moisture in areas with dripping water or heavy condensation.

7.

Food safe, lenticular lenses, provide IP64 protection to each light bar, with a smooth outer surface that minimises the build up of dust and grime.

8.

Each lite bar terminates at the end plate with a rubber mount to cushion against vibration, fixed to the heatsink by a 304SS M4 machine screw.

9.

Corrosion resistant seismic mounts locking heat sink to gear tray at two positions via 304SS M4

10.

At the end of life each light bar is 85% recyclable by weight and can be replaced simply and easily to the main chassis and frame.

11.

Air flows freely around the naturally vented heatsinks, allowing the product to operate in high temperature environments.

12.

Continuous PCB eliminates common corrosion issues typical of linear LED fixtures improving reliability and endurance

1.

CMR Remote LED Driver Case Supply

2.

Opposing M13 Slots at either end for insulated bolts

3.

IP67 and Short Fly Lead

4.

IP67 hot Swappable quick connectors between components. Screw termination to mains input

5.

IP67 Junction Box

6.

Optional ZB Sensor

Reliable mesh network without internet connection

The optional OS-NET ZigBee control system delivers unparalleled control of luminaire without the need for complex programming or data management. Simply program via a point and push infra-red remote.

Select individual lights or program entire groups instantly. Update or change groups at any time, add multiple luminaire to groups or single luminaire to multiple groups.

“Easy Group” settings provide instant access to the most common control needs, but scratch deeper and the system provides intelligent programming that includes: follow me, daylight harvesting, occupancy, vacancy and automatically adjusts to daylight savings.

No ongoing fees, no wireless updates, no complex programming or mapping required. Simple stand alone efficient lighting controls to maximise your energy savings.

Wireless wall switches provide practical over-ride.

Your facility may only require low lux levels for most of the day with casual traffic, and none when empty. Occasionally however you need maximum power for a short burst of activity.

The OS-NET wireless wall switch provides a simple over-ride command to raise lux levels to max before dimming to off when the area is vacated after a set time.

Easy to install to any mains supply, no direct connection to the luminaire circuit required or batteries to forget. It provides an invaluable link between the luminaire you choose to control, and the operator on the ground.

All programmed from the simple infra-red hand held remote control, light or switch group and ungroup, simple easy and intuitive.

Multiple lenses and dual sensor control optimise detection.

Behind the lens dual doppler and IR sensors eliminate false detections, whilst a range of hot swappable lenses fine tune the parameters and sensitivity to suit wide or narrow areas and aisles with blanking plates to prevent detection in areas where walkways are close to the wall.

Whilst ShortBay is sufficiently powerful to deliver excellent lighting outcomes for the majority of commercial applications, when more power is required. PowerBay doubles the format increasing max output to more than 81,000lm @ 5000k,Ra85/ R9≥15 (76,000lm @ Ra95) for a truly breathtaking display of glare free, large format lighting. 

The system is capable of bathing vast areas such as aircraft hangers and sports stadiums with video safe, flicker free light with options suitable for broadcast applications. The PowerBay series is designed for each application and can be customised with a range of additional mounts and structural formats to meet any design challenge.

PB6

220W - 270W
28,160lm - 40,500lm

PB8

300W - 360W
38,400lm - 54,000lm

PB10

400W - 450W
51,200lm - 67,500lm

PB12

450W - 480W
61,440lm - 81,000lm

Product: CMR5-UT-585-180W-DM-R

Application: High Stack Storage -30C

Height: 14m AFFL

Lux Level: 300 lux 1m AFFL at end of life.

Lighting Outcome:
Frutex were thrilled with the lighting outcome of their latest extension in Sydney. A perfect of example of how the ShortBay series delivers unsurpassed uniformity in narrow aisles even at extreme heights.The product eliminates pooling and glare, and as the photograph attests provides perfectly balanced illumination across the face of the aisles and floor. 

Installation:
CMR was specified to ensure minimal penetration through the insulated panel. The product is mounted via two M12 freezer bolts with insulated sleeve and cap to eliminate thermal loss. The remote driver provides both easy access for long term maintenance on the floor above and further reduces the thermal load of the fixture.

Special Features:
The remote mounted dimmable driver was networked with Isollux ZB wireless sensors operating alternative luminaire on staggered timers. Dual switching provides staff advanced warning and a strong visual signal if for any reason a person is out of site of the sensors.Emergency lighting is via centralised UPS powering 30W auxiliary drivers to the main luminaire, Achieving D250 classification at 30W 90Mins per luminaire. The system centralises testing and reduces cost by eliminating the need for dedicated emergency lighting and small battery packs for the main areas.

ShortBay Brochure

ISO-SB-Brochure-0721.pdf

ShortBay Instructions

ISO-SB-Instructions-0721.pdf

CMR Instructions

ISO-CMR-Instructions-0721.pdf

CMS Instructions

ISO-CMS-Instructions-0721.pdf

CMZ Instructions

ISO-CMZ Instructions-0721.pdf

ShortBay Installation Specifications

ISO-SB-Install-Specs-0721.pdf

ShortBay IES Files

SHORTBAY-IES-0721